Add Series to a Display

From dataZoa Wiki
Revision as of 09:31, 30 September 2021 by SNC (Talk | contribs) (Created page with "__TOC__ <br> <br><div class="imgGlyph24 imgHowTo"></div> When adding Series to a dataZoa Display, the starting point is always to select the Series you want to add '''before'...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search



When adding Series to a dataZoa Display, the starting point is always to select the Series you want to add before you edit the display.
These steps do not apply to DataBlock Displays because they are defined by their member Series.


Select Series to Add

From the Workbench, checkbox any series you want to include.

  • Use the Workbench Filter to zero in on your Series.
  • If you already have a Grouplist that includes your Series of interest, apply it and then checkbox from there.
  • If you want to edit several displays from the same general group of Series, consider using the dZCorkboard.

Edit Your Display

Open the Display Editor for your Display, then pick where to insert

For Chart Displays, Subtab:
Series Settings

Use the Add a Checked Series button to complete the insertion.

For Table or Latest Values Displays, Subtab:
Row Settings

Use the Select Row dropdown menu to pick the insertion point, and then use either the Before or After button to complete the insertion.

For Widget Displays, Subtab:
Data

Use the Add Series button to finish your Series selection(s) and then Apply to complete the insertion.